Description:

The COMBOLOOK COLOR is a swedish made SAT-TV/CATV
instrument and spectrum-analyzer. The unit is made for
exact alignment and adjustment of satellite-dishes, aerial
antennas. It is also an exellent tool for working with Cable-TV
networks. It is intended for professional use when high
accuracy and precise information are needed.
It´s easily operated without a lot of unnecessary buttons and
knobs. The basic functions are easy to get a hold on and takes
only minutes to learn.

The instrument is provided with a 5" 16:9 LCD-monitor which
either shows "Free to air" SAT-TV-channel (Digital or Analog),
the frequency spectrum 920-2150 MHz (or parts thereof)
alt. Digital data. Menus/help-displays are shown on the LCDscreen
(64x128) beside the monitor.
SAT-TV: Free to air Digital (DVB-S) and Analog channels can
be tuned in and viewed upon (Multistandard Video PAL, NTSC
and SECAM). Audiofrequencies between 5.5 - 8.5 MHz can
be listened to.
CATV: Analog and CATV channels can be tuned in and viewed
upon.

The COMBOLOOK COLOR is able to work with the return-path
signals in Cable-TV networks (5-65 MHz). according to the
EN50083 standard. The TV-part presents the full range
spectrum of 2-900 MHz which can be zoomed into smaller
parts (min 13 MHz-span). The TV-part is very sensitive and
accurate. It presents signals ±1dB (at +20° C).

The SAT-part also has very high resolution and accuracy.
It presents measured data ±1½ dB (at 20° C). The Sat-TV
spectrum can be expanded (zoom in) for correct adjustment
of the polarisation (?cross-polarisation?).
The SAT- part presents, under one of the sub menus, digital
information like BER (bit error rate), constellation-diagram
(QPSK) and S/N (signal/noise ratio).

The NIT function of the SAT-part can identify the various TVsatellites
by reading out the NIT in the Bitstream (NIT =
Network Information Table). The NIT also contains info about
the transponders TV and Radio-channels.
COMBOLOOK COLOR can handle a lot of memory-positions
and both spectrum-pictures and certain frequencies can be
saved (both analog and digital transponders). The power of
the instrument is supplied by a built in and rechargeable
battery.

Features

• Spectrum-analyzer 2-900MHz and 950-2150MHz
• Presents full range and expanded spectrum
• Very high accuracy, CATV 1dB, SAT-TV ±1½ @ 20°C
• Super bright 5? 16:9 TFT-LCD color display
• DVB satellite-receiver 920-2150MHz
• Automatic Satellite identification
• Readout of NIT - gives SAT ID and TV/Radio-channel info
• Digital BER, QPSK and S/N-ratio
• DVB-S (Free to Air) and Analog TV-picture
• Aerial power output, 0, 6, 12, 18 and 24V
• LNB voltage 13/18V, 22KHz tone switch
• DiSEqC according to level 1.0, 1.1 and 1.2
• Lots of memory positions for spectrum pictures
• RS232 for PC-connection (up/download)
• Rechargeable Li-Ion battery
• Nice & small, only 4Kg complete with carrying case

Technical specification.

Input frequency:
5-900 Mhz and 920-2150MHz.
Sat-TV min level in:
About 35 dBuV (noise).
Sat-TV max level in:
About 90 dBuV.
CATV max input level, picture:
110 dByV.

Spectrum:
120 dByV.
Sat-TV attenuation:
15 dB attenuator on/off.
CATV attenuation:
45 dB in 1 dB step.
Display of signallevel (analog):
dB on LCD/monitor. Pitch-tone.

Sat-TV accuracy:
 ±1½ dB (@ +20° C)
CATV accuracy:
 ±1 dB (@ +20° C)
CATV resolution bandwidth:
1 MHz or 300 kHz.
CATV video bandwidth:
100, 10 ,1 kHz or 100Hz

Sat-TV Digital display of signallevel:
S/N (signal/noise-ratio) BER (bit
Satellite-indentification
error rate) Constellation (QPSK)
Satellite-indentification:
Yes, by reading out the NIT in the
Bitstream. Info about the TV and
Radio channels.

TV standard:
Multi TV/ (PAL, NTSC, SECAM).
CATV text-TV (CEEFAX):
Yes.
KU- C-band: Yes, selectable.
Input impedance:
75 Ohm, BNC-con.
Picture-screen:
5? 16:9 TFT-LCD monitor
Menus:
On LCD 64x128.
Memory:
Lots of spectrum pictures can be
stored with name.
Stored spectrum can be mixed
for easy identification of satellite.
-?Maxhold?-function.
Favouritechannels:
 Both analog and digital frequencies
can be stored (with name).

PC-connection:
 RS232-output and PC-software.
Sat-TV power out:
Yes, 13-18V.
CATV power out: On/off. 15-24 volt.
Sat-TV control:
22 kHz, DiSEqC, SatScan Sat-
Select-positioner.
DiSEqC
Yes, all 1.0 and 1.1. 1.2
Toneburst on/off.
DiSEqC actuator:
Built in positioner for DiSEqC 1.2,
SatScan and SatSelect.
Battery:
Rechargable 12v, 3.5 amp/hour.
Weight:
About 4 kg incl.battery.
Accessories: Nylon carrying-case.
Power-supply of 220v/13.5v,
1.7amp. Car-charger, BNC/Fadapters