Smartmose/Phoenix 3.57MHz/6.00MHz Programmer USB Power
til foregående artikel
|
Artikelnr.: Smartmouse USB vores pris:          inkl. 19% Moms  straks disponibel!kategorie: Programmerere Vegt: 0,30 kg 
|
|
BESKRIVELSE:
The new Smartmose/Phoenix 3.57MHz/6.00MHz is connected via a serialcable RS232 (COM) and has two switches to switch between different oscillators. they also requires a USB-Connection for powersupply (No more DC-adapter needed!). The Smartmouse/Phoenix 3.57MHz/6.00MHz Programmer controls in Smartmouse/Phoenix-mode and programs at an oscillator frequency of 3.57/6.00 MHz and is therefore ideal for the programming reading/writing of 2nd generation ISO 7816 smartcards, SIM card and many others. The programmer is provided with a tough housing and is powered via the USB port of your PC and is connected through the Serial Com port, thereby eliminating the need for a separate power supply. Works with the following smartcards.TitaniumCard (1&2), PlatinumCard, M2Card, Knotcard1 & KnotCard2, Penta VR3 Card, OposCard, TitanCard & Tita´nCard 2, C****a Card & Di*** aCard, dragon loader, knotcard (1&2) , Cerebro card, NextGeneration card, SIM card and many others What is Phoenix, Smartmouse? There are today numerous software's on the internet that are used to communicate with different types of smartcards that follows ISO7816(T=0) standard such as WinExplorer. Common for these programs are that they need a Phoenix- or a Smartmouse-interface to communicate with the smartcard. The interface (really a very simple construction, it was originally created by hobbyists who wanted to communicate with smartcards) transform the signal to/from the serialport of the computer to levels that the smartcard can handle. Then an oscillator is provided to the card so it can handle the commands sent to it. Normally a oscillator at 3.57MHz/6.00MHz are used because the ISO7816-standard originally uses a speed that is "oscillator" divided with 372 that gives approx. 9600 bps. The difference between Phoenix and Smartmouse is the polarity on the reset-signal. Smartmose/Phoenix 3.57MHz/6.00MHz Smartcard reader and writer: Oscillator frequency 3.57MHz/6.00MHz Connected to PC trough serial RS232 (COM) port and USB supply. VPE anzeigen: nein |
spørsmål til produktet
Kunder kjøpte hertil følgende produkter
 Smargo SmartReader Plus kun 28,90 EUR inkl. 19% Moms
|
 SATISFACTION (SCT) TV 8 Channel 12 måneder kun 79,00 EUR inkl. 19% Moms
|
 Smargo USB2 Power 7 PORT HUB kun 17,90 EUR inkl. 19% Moms
|
 Wlan USB Stick for DreamBox 800 kun 18,00 EUR inkl. 19% Moms
|
 FreeXTV 5 Channel - 12 måneder Viaccess 4.0 kun 59,00 EUR inkl. 19% Moms
|
 SmartBee 3,579 Mhz Serial RS-232 Programmer kun 11,90 EUR inkl. 19% Moms
|
