EMP PROFI CLASS - 5 satellites multiswitches

Page 1 of 1
Items 1 - 4 of 4

EMP-Centauri PROFI CLASS Multiswitch MS21/12PIU-6

21in/12out standalone multiswitch for distribution of 20 SAT IF signals including terrestrial for up to 12 users
229,00 EUR *
Available now!

EMP-Centauri PROFI CLASS Multiswitch MS25/12PIU-6

25in/12out standalone multiswitch for distribution of 24 SAT IF signals including terrestrial for up to 12 users
264,90 EUR *
Available now!

EMP-Centauri PROFI CLASS Multiswitch MS29/12PIU-6

29in/12out standalone multiswitch for distribution of 28 SAT IF signals including terrestrial for up to 12 users
299,00 EUR *
Available now!

EMP-Centauri PROFI CLASS Multiswitch MS33/12PIU-6

33in/12out standalone multiswitch for distribution of 32 SAT IF signals including terrestrial for up to 12 users
339,00 EUR *
Available now!

PROFI CLASS - 5 to 8 satellites multiswitches

Unique compact solution for the distribution of terrestrial and satellite signals from up to 8-satellite positions for up to 12 subscribers. Multiswitches require support of DiSEqC 1.1 or 1.2 on the receiver's side. Due to the high number of connected LNBs the multiswitches offer stand-by mode functionality, that minimizes power consumption.

Main features:
  • support Quad LNBs
  • selectable active / passive processing of terrestrial band
  • selectable DC supply for terrestrial preamplifier 12V / 5V / OFF

5 TO 8 SATELLITES MULTISWITCHES

TypeInputsOutputsDescription
MS21/12PIU-62112DiSEqC multiswitch with integrated power supply, Quad LNB compatible, switchable active/passive terr. input
MS25/12PIU-62512
MS29/12PIU-62912
MS33/12PIU-63312
Useful information
  • Individual LNBs are accessible using following DiSEqC 1.1 commands:
    Sat system (LNB)?committed command??uncommitted command?
    A (1)A (1,AA)1
    B (2)B (2,AB)1
    C (3)C (3,BA)1
    D (4)D (4,BB)1
    E (5)A (1,AA)2
    F (6)B (2,AB)2
    G (7)C (3,BA)2
    D (8)D (4,BB)2
  • If the receiver does not support DiSEqC 1.1, user has to resort to DiSEqC 1.2 motor commands (not USALS)
  • With standard DiSEqC 1.0 setting only sat systems A to D are available
  • Multiswitches are not compatible with Monoblock LNBs
  • Stand-by circuitry monitors usage of any LNB and if not watched by any user, shuts off power to this LNB and relevant inner circuits
  • Terrestrial input can provide 12 V or 5 V DC (selectable by DIP-switch), up to 150 mA
  • If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters
  • Terminate all unused outputs by 75 ohm loads, if terrestrial band is used