Inverto IDLU-24UL40-UNMOO-OPP Unicable II programmable 40mm LNB with 24 User bands

Item number: IDLU-24UL40-UNMOO-OPP

Category: One Cable Systems Unicable


59,00 EUR

including 19% VAT., plus shipping

Not available now!


Description

This Unicable2 LNB enables installations with up to 24 satellite receivers connected over a single coax cable and using the EN50494/EN50607 protocols providing access to unlimited number of transponders (also known as ?Dynamic? mode) . Alternatively, it can be configured to deliver a fixed mapping of transponder frequencies to IF frequencies (also known as ?Static? mode), allowing an unlimited number of receivers to be connected and providing them access to up to 24 transponders (or more, depending on the bandwidth of the desired transponders) based on digital channel stacking technology.
 
Digital channel stacking technology uses fast wide­band analog to digital converters and applies digital signal processing to select desired transponder channels, up convert them and stack them as IF signals over the Unicable output ports. The Unicable2 LNB offers a full flexibility of channel selection, supports many more set-top-boxes over existing cabling thus significantly reducing cost and simplifying installations at subscribers homes. The Static mode, allowing an unlimited number of receivers to be connected to the LNB, makes multi-room distribution and MDU installations substantially cheaper and simpler than ever before. The operating mode - dynamic or static - output power level, channel bandwidth, UB numbers, center frequencies and dish alignment mode are all programmable and can be configured and updated in the field using a dedicated programmer device*.
 
The LNB can be powered over a connected STB or by an AC/DC adapter over a power inserter in case the STB is unable to provide the necessary power. The Unicable2 LNB is backward compatible, fully compliant with both EN50494 and EN50607 standards and integrates seamlessly into EN50494-only or mixed EN50494/EN50607 installations of compatible STBs, Next Generation PVRs and HGWs.
 
For more information on the Unicable2 technology and its advantages please refer to: www.inverto.tv/unicable2
 
Main Features:
¦ Low phase Noise HDTV-DVBS2 compliant
¦ Low Noise Figure
¦ Very high cross-pol isolation
¦ Programmable Static frequency mapping mode
¦ Dish alignment mode 
 
* Programmer not included, sold separately as an optional accessory.

Input Frequency Range 10.7 ~ 12.75 GHz
Noise Figure 1 dB Max.
LO Frequency 10.4 GHz
LO Initial Accuracy +/- 1.0
LO Temperature Drift +/- 2.5
LO Phase Noise @ 10K Hz -80 dBc / Hz
Unicable Conversion Gain (AGC) 55 dB Min.
Gain Variation +/- 0.75 dB/UB
Image Rejection 40 dB Min.
Cross-pol Isolation 22 dB Min.
1 dB Compression Point (Output) 0 dBm min.
Output VSWR 2.5 : 1 max.
Output Impedance 75O (F-type)
IF Channel (User Band) bandwidth Configurable 10~80MHz (default 42MHz)
Output IF Channels (UBs) Up to 24, Default 24UBs:
  CH1 1210MHz (EN50494+EN50607)
  CH2 1420MHz (EN50494+EN50607)
  CH3 1680MHz (EN50494+EN50607)
  CH4 2040MHz (EN50494+EN50607)
  CH5 1005MHz (EN50494+EN50607)
  CH6 1050MHz (EN50494+EN50607)
  CH7 1095MHz (EN50494+EN50607)
  CH8 1140MHz (EN50494+EN50607)
  CH9 1260MHz (EN50607)
  CH10 1305MHz (EN50607)
  CH11 1350MHz (EN50607)
  CH12 1475MHz (EN50607)
  CH13 1520MHz (EN50607)
  CH14 1565MHz (EN50607)
  CH15 1610MHz (EN50607)
  CH16 1725MHz (EN50607)
  CH17 1770MHz (EN50607)
  CH18 1815MHz (EN50607)
  CH19 1860MHz (EN50607)
  CH20 1905MHz (EN50607)
  CH21 1950MHz (EN50607)
  CH22 1995MHz (EN50607)
  CH23 2085MHz (EN50607)
  CH24 2130MHz (EN50607)
  
Channel isolation 25 dB Min.
Unicable Control Signals DiSEqC1.x/DiSEqC2.x, EN50494/EN50607
DC Power 350mA@13.5V
Working Temperature - 30°C~ + 60°C
Weight  350g


Shipping weight:0,50 Kg

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Product Tags