The Stab DiSEqC 1.2 Mini-Rotor Control MP02 is the perfect tool for a reliable DiSEqC installation. New nine button version as pictured above right.
The Mini-Positioner Rotor Control MP02 allows for storage and automatic recall of 4 sat positions directly from a PC-Card or a DiSEqC 1.0 receiver. Connected to the cable between motor and receiver and directly powered by the receiver itself, it converts DiSEqC 1.0 codes into DiSEqC 1.2 codes to drive the motor. Besides the buttons for the manual rotation eastwards and westwards, the mini-positioner is provided with 4 push-buttons for memorisation of 4 sat positions, 1 push-button for memorisation of the limits; 1 push-button to remove the limits; 1 push-button for the "zero" function allowing the motor to re-align to the zero position at any moment.
Easy to use, in 5 minutes it enables the dish to be perfectly pointed with only the help of the field strength meter. The Rotor Control connected to the cable between the motor and the receiver, is a DiSEqC1.2 command generator for turning the motor east and west, fed directly from the receiver. The 'zero' function, which allows the motor to return perfectly aligned to zero at any moment, is of particular importance when the Rotor Control is permanently installed near the receiver and when the user is not very familiar with the OSD of the receiver. Just by pressing the 'zero' button, besides the alignment to zero, all functions previously memorized are reset, thus avoiding nearly all calls for assistance.
Power Supply: 13/18Vcc
Consumption in Standby Mode: 5mA
Consumption in Operating Mode: 15mA
Attenuation: < 6dB
Operating Mode: Completely Transparent
Operating Protocol: DiSEqC 1.0
Generated Commands: DiSEqC 1.2
Programmable Positions: 4 Positions
Connection: F Connector
Dimensions: 32 x 74 x 30 mm
Weight: 120 grms
|Poids de livraison:||0,50 Kg|